Propeller Maintenance; Replacing The Anode - Epropulsion NAVY Evo-Serie Bedienungsanleitung

13.3 Propeller Maintenance

Disconnect the battery with outboard before maintenance.
Gloves are recommended to protect your hand from sharp propeller edges.
Check the propeller according to the following instructions, then refer to then refer to
section 2.2 Selecting and Mounting the Propeller to replace a new propeller if neces-
sary.
1. Check the propeller blades for wear, cavitation erosion and other damage.
2. Check the pin for wear and damage.
3. Check for water plants, fishing net or line twine around the propeller.
4. Replace a new anode if necessary.

13.4 Replacing the Anode

Please refer to the figure below to replace a new anode if necessary.
Figure 13-1
Anode
Figure 13-2
50
Screw
Spring Washer
Plain Washer
Anode