7.3
Mounting accessories for tensile/compressive loading
Knuckle eyes are available for installing with the Z30A (see page 26). These
mounting accessories prevent the introduction of torsional moments into the
transducer. Using two knuckle eyes will also exclude bending moments, shear
loading and eccentric loading. Knuckle eyes are mainly provided to deal with
static tensile loading on the transducer.
For dynamic loading, Z30A transducers must be installed free from play.
Knuckle eyes have only limited application in the case of dynamic loading,
since alternating dynamic stress increases the play in the universal joints and
falsifies the measured value. It also produces a self‐amplifying load cycle which
can destroy the knuckle eyes. The breaking force is only 150% F
Thrust pieces EDO3/1kN or EDO4/50kN (see page 28) and two load buttons
(see page 27) are available for introducing compressive forces.
7.3.1
Installation drawing for compressive loading
Type
Z30A/50N - 1000N
Z30A/2kN - 10kN
Z30A
F
Load button
1-U1R/200kg/ZL
3-9202.0140
A02076_01_X00_01 HBM: public
Mechanical installation
Thrust piece
Load button
Transducer
.
nom
Thrust piece
1-EDO3/1kN
1-EDO4/50kN
11