HBM Z30A Montageanleitung Seite 17

Area 3:
Data specified by the manufacturer is contained in this area:
The data specifies
S The transducer type,
S The measured quantity,
S The electrical output signal,
S The required excitation.
HBM has already specified the Bridge Sensor template for the Z30A for a
trandsucer.
Additional templates such as the Signal Conditioning template can be specified
by the user.
Area 4:
The actual user can modify the last of these areas with, for instance:
S A short comment in text form,
S Filter settings,
S Zero value.
Example:
Content specified by HBM on the individual test report: Area 3 of the Z30A/2kN
sensor, ID no. 123456, produced 2006-06-01 by HBM.
Template: Bridge Sensor
Parameter
Transducer Electri­
cal Signal Type
Minimum Force/
Weight
Maximum Force/
Weight
Z30A
1)
Value Unit
Bridge
Sensor
0.000 N
2.000k N
A02076_01_X00_01 HBM: public
Electrical connection
Change
requires
Explanation
rights to
level:
ID
CAL The physical measured
quantity and unit are defined
when the template is created,
CAL
after which they cannot be
changed.
15