Figure 9: Transmission Hump Trunnion Mounting - Motorola solutions WAVE Mobile TLK 150 Installationsanleitung

Verfügbare Sprachen

2 Using the trunnion mounting bracket as a template, mark the positions of the holes on the

mounting surface. Use the innermost four holes for a curved mounting surface such as the

transmission hump, and the four outmost holes for a flat surface such as under the dash.

3 Center punch the spots you have marked and realign the trunnion in position.

4 Secure the trunnion mounting bracket with the four self-drilling screws provided. The number of

screws used will depend on how the radio is mounted.

5 Position the radio to align the trunnion with the trunnion mounting features on the radio. Secure

the radio with the two wing screws and lock washers (position the flat side of the washer to the

thumbscrew and the washer sharp side to the trunnion) provided.

Figure 9: Transmission Hump Trunnion Mounting

Chapter 4: Installation Details for Standard Configurations

Threaded Hole for Wing Screw

MN007262A01-AD