Siemens SIMOVERT Master Drives 6SE70 Betriebsanleitung Seite 346

Start-Up
Bit 12 bis Bit 15 enthalten die Auftragskennung bzw. die dazugehörende Antwortkennung entsprechend der
folgenden Liste:
Request
identifier
0
1
2
3
4
5
6 Request parameter value (array) (word or double word)
7
8
9
10
11 Modify parameter value (array-double word) and store in EEPROM
12 Modify parameter value (array-word) and store in EEPROM
13 Modify parameter value (double word) and store in EEPROM
14 Modify parameter value (double word) and store in EEPROM
15
If the common rectifier has been unable to process the request, it does not return the associated response
identifier, but error identifier 7 (or 8) instead.
In this case, an error code defining the error in more detail as shown in the following list is returned as a
parameter value:
Error code
0
1 Parameter value cannot be modified
2
3
4 Parameter is not indexed (no array)
5 Parameter is not indexed (no array)
6
7 Descriptive element cannot be modified
8 PPO Write (acc. to "Information Report") is not available
9 Parameter description is not available
10
11
12
13
15
16
17
19
101 Parameter number currently deactivated
102
103
104
4-72
ENGLISH
Meaning
No request
Request parameter value (word or double word)
Modify parameter value (word)
Modify parameter value (double word)
Request descriptive element
Reserved
Modify parameter value (array - word)
Modify parameter value (array-double word)
Request number of array elements
Reserved
Request text
Illegal parameter number (PNU)
Lower or upper value limit violated
Faulty subindex
Parameter value can only be reset
Incorrect access level
No parameterizing enable (P927)
Keyword missing
Text cannot be read cyclically
No text
PPO Write missing
Incorrect operating state
Value cannot be read cyclically
Channel not wide enough
PKW number incorrect
Illegal parameter value
Response identifier
positive
0
1 or 2
1
2
3
-
4 or 5
4
5
6
-
5
4
2
1
15
Meaning
No PNU specified
Visualization parameter
Key parameter P051 incorrectly set
Applies only to serial interfaces
Applies to BiCo selection parameters
Common Rectifier
negative
7 or 8
Siemens AG 6SE7087-6AK85-0AA0
Operating Instructions
09.02