Installation Of The Oven; Electricals - Fulgor Milano FUO 6009 MT MBK Installation Und Gebrauch

2 - Installation of the oven

EN
To install the oven into the kitchen a cutout should be made in
accordance with the dimensions shown in Fig. 1.
The apparatus is to be fastened to the top by means of the two
screws provided in the kit through the holes made on the oven
uprights.
The cabinet in which the apparatus is installed shall be open
on the back side to ensure a sufficient air circulation and
prevent overheating.
Leave a gap of at least 200 cm
if the oven is installed in a column; this is not necessary if the
oven is installed under the work top.
WARNING
As the apparatus is to be fitted in your kitchen
furniture, make sure that all surfaces in contact
with the oven can resist a temperature of approx
90°C.

Electricals

Absorbed power:
oven top element:
oven bottom element:
round element (hot air):
roasting jack motor:
lamp:
hot air fan motor:
cooling fan motor:
Maximum absorbed power:
(see data plate)
Supply voltage:
(see data plate)
NOTE:
This appliance is in compliance with following European
directives: 2006/95/CE (LVD), 2004/108/CE (EMC),
2011/65/CE (RoHS), 2012/19/UE (WEEE), 2002/40/CE.
4
(see Fig. 1) for air circulation
2
1200+1000W 230V -
1200+1000W 240V
1100W 230V - 1100W 240V
2300W 230V - 2300W 240V
(on some models)
4 W
(on some models)
25 W
25 W
25 W