Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.
WINTERIZING THE INSTALLATION
•
Backwash the filter,
•
Treat the pool water with winterizing products.
•
Run the pump with the mulitport valve set to "circulation" to homogenise the concentration of these
chemicals in the pool water.
•
Stop the pump,
•
Turn the mulitport valve to the "DRAIN" position,
•
Open the valve on the waste line,
•
Close the skimmer and vacuum point valves,
•
Turn the motor on,
•
Lower the water level by about 30 cm,
•
Next, drain the filter by unscrewing the drain plug at the base,
•
Close all the valves,
•
Unscrew the drain plugs on the motor,
•
Cut power to the control panel,
•
Store the motor somewhere dry.
•
Put the 6-way multi-port valve to the "HIVER" (WINTER) position (see below)..
CONSTRUCTION & RÉNOVATION
2021/01 - Indice de révision : F - Code : 26730
21/36
Werbung
Kapitel
Inhaltsverzeichnis
