Fit Paper Catch - HEIDELBERG Suprasetter 106 Installationsanleitung

Fig. 25 Transport safeguard bracket, rear of turntable

Fit Paper Catch

Fig. 26 Paper catch
Fig. 27 Rollers
DCL für Suprasetter 106 – Installation
Loosen the screws of the transport safeguard
brackets (Fig. 25/1) and (Fig. 25/2) and remove
the brackets.
Close the conveyor again and fit the four screws
again.
Close the back part of the tubular pipe (Fig. 26/3)
with the two plugs (Fig. 26/1).
Thread the tubular pipe (Fig. 26/3) through the
paper container cloth (Fig. 26/4). The bond seam
of the cloth is on the inside.
Fit the four rollers (Fig. 26/2) to the tubular pipe
(Fig. 26/3).
First, insert the two back rollers, then the two front
rollers into the groove (Fig. 27/1). Close the two
openings with the cover plates.
Installation
31