Cleaning And Maintenance - Beko HCA 62420 B Benutzerhandbuch

4

Cleaning and Maintenance

Prior to cleaning and maintenance, unplug the
appliance or turn the main swich off or loosen the
fuse that supplies the hood.
Failure to comply with the provi-
sions relating to cleaning of the
device and replacement of filters
A
may cause fire risks. It is therefore
recommended to comply with the
guidelines given herein. The manu-
facturer is not liable for any damage
to the engine or fires caused by im-
proper use.
Clean using only a cloth dampened with neutral
liquid detergent. Do not clean with tools or
instruments. Do not use abrasive products. Do not
use alcohol
4.1 Cleaning of Aluminium Grease
Filter
This filter captures oil particles in the air. You are
recommended to clean your filter every month
under normal usage conditions. First remove
the grease filters for this process. Wash the
filters with liquid detergent and rinse them with
water and install them back after they get dry.
Aluminium grease filters may get discolered as
they are washed; this is normal and you don't need
to change your filter.
1
Fig. 5
10 / EN
4.2 Changing of Carbon Filter (Air
Circulation Mode)
The hood can be fitted with an active carbon filter.
The carbon filter is applied only in case the hood is
not connected to the vent duct.
In any case it is necessary to replace the carbon
filter at least every three months.
2
C
You can wash the grease filter in
the dishwasher
A
:
WARNING
never washed.
A
:
WARNING
from Authorized Services.
Cooker Hood / Instructions Booklet
Fig. 6
Fig. 7
The carbon filter is
Carbon filter is available