Cleaning And Maintenance - Beko CWB 6441 WN Bedienungsanleitung

Cleaning and maintenance

4
The device should be cleaned and maintained
regularly. Failure to keep the device clean will
adversely affect the service life of the device. For
cleaning and maintenance, follow the instructions
stated in the manual.
C
Before cleaning and maintenance,
unplug the product or turn off the
switch.
Non-compliance with the provisions
associated with the cleaning of the
device and replacement of the filters
may result in a risk of fire. Therefore,
it is recommended to follow the gui-
delines stated here. The manufactu-
rer is not responsible for the engine
damages or fires originating from
the improper use.
Clean the hood using a damp cloth and a neutral
liquid detergent.
4.1 Cleaning of the grease filter
Grease filter retains the oil particles in the air.
Grease filters may change colour after repeated
cleaning. This is normal and does not require rep-
lacement of filters.
• Push the grease filter lock forward.
• Then pull it slightly down and pull it out. Other-
wise, you can bend the filter. Wash and rinse
grease filters with liquid detergent and replace
grease filters to their sockets by by carrying out
the steps specified above in reverse order. This
Cooker Hood / User Manual
filter retains the oil particles in the air.
C
You may wash your grease filters in
the dishwasher.
A
CAUTION: In case of normal use,
clean your filter once in a month.
4.2 Replacement of carbon filters
Odour removing filters contain charcoal (Active
carbon). Grease filters must be installed in the
product, regardless of whether or not carbon fil-
ters are used.
a
b
• Remove the grease filter.
• To remove the carbon filter, remove the carbon
filter from its housing by rotating it counter-
clockwise from the tab.
• Install the new carbon filter.
• Install the grease filter.
11 / EN