Cleaning And Maintenance - Beko CTB 6407 X Bedienungsanleitung

Cleaning and maintenance

4
The device should be cleaned and maintained
regularly. Failure to keep the device clean will
adversely affect the service life of the device. For
cleaning and maintenance, follow the instructions
stated in the manual.
C
Before cleaning and maintenance,
unplug the product or turn off the
switch.
Non-compliance with the provisions
associated with the cleaning of the
device and replacement of the filters
may result in a risk of fire. Therefore,
it is recommended to follow the gui-
delines stated here. The manufactu-
rer is not responsible for the engine
damages or fires originating from
the improper use.
Clean using only a cloth dampened with a neutral
liquid detergent. Do not use abrasive products or
alcohol.
4.1 Cleaning of grease filter
This filter captures particles in the air. You are re-
commended to clean your filter every month under
normal usage conditions. First remove the grease
filters for this process. Wash the filters with liquid
detergent and rinse them with water and install
them back after they get dry. Grease filters may
get discolered as they are washed; this is normal
and you don't need to change your filter.
C
You can wash the grease filter in the
dishwasher
A
CAUTION: In case of normal use,
clean your filter once in a month.
Cooker Hood / User Manual
Z
4.2 Changing of Carbon Filter (Air
Circulation Mode)
The hood can be fitted with an active carbon filter.
The carbon filter is applied only in case the hood is
not connected to the vent duct.
When replacing the carbon filter pay attention to
the type of used turbine.
1
2
1
2
Symbol Filter installation
Symbol Filter dismanting
WARNING:
• The carbon filter is never washed.
A
• Replace carbon filters once every
3 months.
• Carbon filter is available from Aut-
horized Services.
11 / EN