Cleaning And Maintenance - Beko HNT61110X Anleitung

Cleaning and Maintenance

4
C
Before cleaning and maintenance,
unplug the product or turn off the
switch.
4.1 Cleaning of grease filter
Grease filter is used to retain the oil particles in the
air. Grease filter may change colour after repeated
cleaning. This is normal, and you do not have to
replace your filters.
1
1. External grease filter
2. Internal grease filter
• Pull the sliding plate out by holding the front
panel. Remove the external grease filter first,
and then the internal grease filter.
• Push the grease filter lock forward.
• Then pull it slightly down and pull it out. Other-
wise, you may bend the filter. Wash and rinse
grease filter with liquid detergent and replace
grease filter to their seats by carrying out the
steps specified above in reverse order. These
grease filter are used to retain the oil particles
in the air.
C
You may also wash the grease filter
in the dishwasher.
A
CAUTION: In case of normal use,
clean your grease filter once in a
month.
Cooker Hood / User Manual
4.2 Replacement of carbon filters
Odour removing filters contain charcoal (Active car-
bon). Grease filter must be installed in the product,
regardless of whether or not carbon filters are used.
2
• Remove the grease filter.
• To remove the carbon filter, remove the car-
bon filter from its housing by rotating it coun-
ter-clockwise from the tab.
• Install the new carbon filter.
• Install the grease filter.
A
CAUTION
• Carbon filter shall never be
washed.
• Replace carbon filters once every
3 months.
• You can obtain the carbon filter
from the authorized services.
11 / EN