Main Use And Maintenance Operations; Removing The Fairing - Ducati 999R 2005 Anleitung- Und Instandhaltungsheft

MAIN USE AND MAINTENANCE OPERATIONS

Removing the fairing

Some servicing operations need the motorcycle fairing to
be removed.
Warning
Firmly and properly secure all removed parts when
refitting them, otherwise some of them might suddenly
come off when riding and you may lose control of your
motorcycle.
Important
At reassembly always fit nylon washers when
tightening fastening screws, so as not to damage
painted parts and Plexiglas headlamp fairing.
Side body panels
Remove the body panels as follows: Remove the four
quick fasteners (3) with their ring securing the body
panels to the frame.
On the right-hand side, gain access to the tool kit, take
the Allen key for the fairing and remove the following:
the two quick fasteners (1) securing the body panels to
the brackets;
the two quick fasteners (2) securing the body panels to
the headlamp fairing;
the screw (4) joining the right and left body panels at the
bottom end.
2
3
4
fig. 48
E
1
55