If the engine fails to start, wait at least 2 seconds
before pressing the start button (3) again.
Allow the engine to start without turning the throttle
twistgrip.
Note
If the battery is flat the system automatically disables
operation of the starter motor.
4) Slowly move the cold start lever (1) to its vertical
position (A) (fig. 42).
Important
Do not rev up the engine when it is cold. Allow
some time for the oil to warm up and reach all points
that need lubricating.
High ambient temperature (over 35°C/95 °F):
Follow the same procedure for "Regular ambient
temperature", however, do not use the device (1, fig. 42).
Cold ambient temperature (below 10°C/50 °F):
Follow the procedure for "Regular ambient temperature",
however allow 5 minutes for the engine to warm up.
A
B
1
fig. 42
2
3
fig. 43
49
E