Parker AC30 Serie Benutzerhandbuch Seite 362

WQ: The write qualifier.
ALWAYS
STOPPED
CONFIG
NEVER
View: Indicates when the parameter is visible on the GKP or the Web page.
Parameters that are not relevant to the current drive's configuration may be hidden regardless of the View level.
OPERATOR
TECHNICIAN
ENGINEER
Mbus: The Modbus register number corresponding the this PNO.
Notes:
1. The parameter is automatically saved before power down
2. Input parameter is not saved.
3. Output parameter is saved.
4. Parameter is hidden depending on the drive configuration.
5. Parameter is cloned as part of the "Other Parameters" group.
6. Parameter is cloned as part of the "Power Parameters" group.
7. Parameter is cloned as part of the "Drive Unique" group.
8. Parameter availability depends on the application selected.
AC30V series Variable Speed Drive
The parameter has no write restrictions
The parameter is only writable when the motor is not being controlled
The parameter may only be written when the drive is in CONFIGURATION mode (NOT READY TO SWITCH ON)
The parameter is monitor only
The parameter is always visible.
The parameter is visible when the view level is set to OPERATOR or TECHNICIAN
The parameter is visible when the view level is set to OPERATOR, TECHNICIAN or ENGINEER
D-126
Parameter Reference