Parker AC30 Serie Benutzerhandbuch Seite 292

IO Values
Monitor::Inputs and Outputs
Parameters::Inputs and Outputs::IO Values
These parameters present the Input and Output values in a form suitable for processing by the application and fieldbus.
PNO Parameter Descriptions
0005
Digin Value
Presents all the digital inputs to the drive as a 16-bit word. The bits within the word may be accessed individually, or the entire
word may be accessed as a group.
*
0022
Digout Value
AC30V series Variable Speed Drive
Bit Signal name Terminal
0 Digital Input 01 X13.2
1 Digital Input 02 X13.3
2 Digital Input 03 X13.4
3 Digital Input 04 X12.1
4 Digital Input 05 X12.2
5 Digital Input 06 X12.3
6 Digital Input 07 X12.4
7 STO Inactive X10
8 Digital Input 11 X20.1
9 Digital Input 12 X20.2
10 Digital Input 13 X20.3
11 Digital Input 14 X20.4
12 Run Key -
13 Not Stop Key -
14 Stop Key -
If the GKP is not fitted then both "Not Stop Key" and "Stop Key" will be 0. This condition may be used to detect a
disconnected GKP.
Presents all the digital outputs from the drive as a 16-bit word. The bits within the word may be accessed individually, or the
entire word may be accessed as a group.
Bit Signal Name Terminal
0 Digital Output 01 X12.1
1 Digital Output 02 X12.2
2 Digital Output 03 X12.3
3 Digital Output 04 X12.4
4 Relay 01 X14.1&2
5 Relay 02 X14.3&4
8 Digital Output 11 X20.1
9 Digital Output 12 X20.2
10 Digital Output 13 X20.3
11 Digital Output 14 X20.4
14 Relay 11 X23.1 & 2
15 Relay 12 X23.3 & 4
Comment PNO for individual bit access
Common terminal with digital output 1
Common terminal with digital output 2
Common terminal with digital output 3
Common terminal with digital output 4
GPIO option
GPIO option
GPIO option
GPIO option
GKP Run key pressed*
GKP Stop key not pressed*
GKP Stop key pressed*
Comment PNO for individual bit access
Common terminal with digital input 4
Common terminal with digital input 5
Common terminal with digital input 6
Common terminal with digital input 7
GPIO option
GPIO option
GPIO option
GPIO option
GPIO option
GPIO option
D-56
Parameter Reference
0006
0007
0008
0009
0010
0011
0012
0013
0014
0015
0016
0017
0018
0019
0020
0023
0024
0025
0026
0027
0028
0031
0032
0033
0034
0037
0038