Parker AC30 Serie Benutzerhandbuch Seite 265

D-29
Parameter Reference
Drive info
Setup::Environment
Parameters::Device Manager::Drive info
PNO Parameter Descriptions
0961
Drive Name
A string value that may be used to identify this drive in a system.
1100
Firmware Version
The version of the firmware running in the Control Module.
0951
Boot Version
The version of the boot loader firmware running in the Control Module, presented as a text string.
0687
Boot Version Number
The version of the boot loader firmware running in the Control Module.
0987
Power Stack Required
The rating of the power electronics for the configuration loaded in the drive. If 0987 Power Stack Required is different from 0543
Power Stack Fitted the drive will be prevented from operating normally until the configuration is corrected.
0543
Power Stack Fitted
The rating of the power stack that the Control Module is fitted to. When the Control Module not attached to a stack this parameter is
not visible and is ignored.
0695
Attached to Stack
A Boolean parameter that indicates that the Control Module is attached to a power stack. When the Control Module is not attached to
a stack but is powered using the auxiliary 24v input this parameter will indicate FALSE.
1109
Stack Pcode
The product code string that may be used to order an equivalent Power Stack.
1258
Stack Serial No
The serial number of the Power Control Card, (part of the Power Stack assembly).
1116
Control Module Pcode
The product code string that may be used to order an equivalent Control Module, excluding options.
0977
Control Module Serial
The serial number of the Control Module.
AC30V series Variable Speed Drive