Assembly; Mount Planing Shafts Cover; Assembly / Disassembly Of The Saw Blade; Mortiser Mount (Optional) - HOLZMANN-MASCHINEN K5 260L Originalbetriebsanleitung

13.2

Assembly

13.2.1 Mount planing shafts cover

Planer cover Fit (A) and secure with clamping lever (B)

13.2.2 Assembly / disassembly of the saw blade

Loosen the screws of the table insert and remove them.

Adjust the cutting height to the widest possible by Crank

up the saw blade.
Insert the special key on the flange and turn the screw

out of.
The blade can be removed and a new one inserted. Instal-

lation is in the reverse order of removal.
ATTENTION: The correct direction of rotation of the saw
blade note!

13.2.3 Mortiser mount (optional)

A
The surface and thickness planer can be optionally equipped with a mortising.
- Mortiser (A) to the respective holes of the machine position
- Mortising attach with screws and washers
- Before tightening the angle of the table with the adjusting screw (B) can be adjusted!
HOLZMANN Maschinen Austria
All manuals and user guides at all-guides.com
- Set machine on a flat, level surface
- Feet (A) mounted on the base frame
- Align the machine horizontally by adjusting the
leveling feet
www.holzmann-maschinen.at
5-fach Kombination / combined 5-operation machine K5 260L
ASSEMBLY
A
A
B
B
Seite 44