The Electrobrush/handheld brush (depending on the
model), the PowerUnit, the suction tube, the body and the
Comfort handle contain electrical wires. The plug connect-
ors must not come into contact with water. Danger of elec-
tric shock. They should only be cleaned with a dry cloth.
Clean the vacuum cleaner and accessories only with a
dry or slightly damp cloth when disconnected from the
power supply. Exception:
- Dust container: empty the dust container and remove
the pre-filter. Clean the dust container using water and
mild washing-up liquid only. Then dry the dust container
carefully. Replace the pre-filter in the dust container.
Correct use
Do not use the vacuum cleaner without the dust con-
tainer, pre-filter, fine dust filter and motor protection filter
fitted.
Do not vacuum up anything which has been burning or
is still glowing e.g. cigarettes, ashes or coal, whether glow-
ing or apparently extinguished.
Do not use the vacuum cleaner to vacuum up any water,
liquid or damp dirt. Wait until any freshly cleaned or sham-
pooed rugs or carpets are completely dry before attempt-
ing to vacuum.
Do not use the vacuum cleaner to vacuum toner dust.
Toner, such as that used in printers and photocopiers, can
conduct electricity.
en - Warning and Safety instructions
37