Installation; Installing The Control Unit - Kessel Pumpfix Einbau- Und Betriebsanleitung

4

Installation

4.1

Installing the control unit

Select installation position taking the following into
account:
There is a safety socket in the direct vicinity of the con-
trol unit.
The connecting cable from the wastewater pump and
float switch can be installed correctly and routed to the
control unit.
The control unit can be fastened safely and suffi-
ciently.
Fit all fastening screws (drilling template included in the
scope of delivery). In doing so, ensure that the distance
(A) between the screw heads and the fastening surface is
approx. 3 to 4 mm.
Hang the control unit on the fastening screws and press
downwards gently. (1)
4.2 Connect the battery
Ensure that the mains plug in unplugged.
Undo both screws (anticlockwise) and lift up the housing
cover.
Check whether both batteries are connected.
Reclose the housing.
20 / 84 Installation and operating instructions 016-004_01