Programmed Playback; Quick Search - Denon UD-M31 Bedienungsanleitung

ENGLISH
(4) Playing the tracks in a certain order ........................................................................
(Using the remote control unit)
1
Press the PROG/ DIRECT button.
Press the number and +10 buttons to
select the track to be programmed.
2 • For example, to program the 3rd
track and the 12th track, press
+10 , and 2 .
Press the / (play/pause) button to
1 3
start playback.
3
• The tracks are played in the
programmed order.
• Press the PROG/DIRECT button again to resume normal playback during the stop mode.
• To cancel the entire program, press the PROG/DIRECT button or cancel the program one by one using the CLEAR
button.
• If you program the wrong track, press the CLEAR button then program the right track. (The last track in the
program is erased each time the CLEAR button is pressed.)
• To confirm the programmed playing order, press the CALL button. The programmed playing order appears in the
display. Pressing the CLEAR button with a track number appearing in the display automatically erases that specific
track from Program Play.
Other operations possible during programmed playback:
Such operations as quick search, pause and skip monitor are also possible during programmed playback.
For the quick search function, press the automatic search reverse button (
track, then press it again while the time display reads "00:00" to move back to the beginning of the preceding track.
To move ahead to the beginning of the next track, press the automatic search forward button (
time display.
NOTES:
• With this CD receiver, you can program up to 25 tracks.
• Programming is also possible with the disc tray open. In this case it is possible to program a track number not
included on the disc. But when the program is played, that track number will be skipped.
• The entire program is canceled when the
• Set the stop mode when cancelling tracks from the program. To cancel the program mode, press the
PROG/DIRECT button.
20

Programmed Playback

"PROG" lights
Displays when the 3rd track is set at
SYSTEM
the first place
POWER
TITLE/CHARACTER TIME
EDIT
RANDOM SLEEP
TUNING TUNING
RDS
ENTER
MEMORY
REPEAT FUNCTION
TONE /SDB
TUNER
PTY PRESET Displays the
- +
PROG /
DIRECT programmed tracks and total playing
BAND
1
time.
GROUP CD-R MD
CT
VOLUME
3
DISC
SKIP
CD
,
3
1 2 3
DISPLAY
CALL
4 5 6
2
PANEL
Displays when the 12th track is set at
7 8 9
CLEAR the second place
10 +10
TAPE
B
RC-933
Displays the
programmed tracks and total playing
time.
) to move back to the beginning of the
8
9
5 (open/close) button is pressed.
Automatic search reverse button (
CD RECEIVER UD-M31
ON / STANDBY
after 2 seconds
(5) Moving ahead to the next track during playback ......................................................
Press the automatic search forward button (
total number of
(6) Moving back to the beginning of the track during playback .......................................
Press the automatic search reverse button (
(7) Finding a certain spot on the disc while listening to the sound .................................
after 2 seconds
(Using the remote control unit)
• Use this function to skip through the disc while listening to the sound.
• When the desired spot is reached using the skip monitor function, release the manual search forward button (
total number of
manual search reverse button (
Manual search reverse button (
q q Forward skip monitor
(Using the remote control unit)
During playback, press and hold in the manual search forward button (
direction while listening to the sound.
• The track currently being monitored and the elapsed time for that track are indicated on the display.
• If the manual search forward button is held in until the end of the disc is reached, the stop mode is set.
) regardless of the
w w Reverse skip monitor
(Using the remote control unit)
During playback, press and hold in the manual search reverse button (
direction while listening to the sound.
• The track currently being monitored and the elapsed time for that track are indicated on the display.
• If the manual search reverse button (
the disc. Release the manual search reverse button (
8 ) Automatic search forward button (
BAND
- +
MENU / SET
TONE/SDB
VOLUME
FUNCTION
PHONES
9 ).
).
8
6 ) to resume normal playback from that point.
SYSTEM
TITLE/CHARACTER TIME POWER
EDIT
RANDOM SLEEP
TUNING TUNING
6 ) Manual search forward button (
RDS
ENTER
MEMORY
REPEAT FUNCTION
TONE /SDB
TUNER
PTY PRESET
- +
PROG /
DIRECT
BAND
GROUP CD-R MD
CT
VOLUME
7 ) to skip through the disc in the forward
6 ) to skip through the disc in the reverse
) is pressed continuously, it will reach the beginning of the first track on
6
6 ) to resume normal playback.
9 )

Quick Search

Quick Search
Skip Monitor
) or
7
7 )