Selco Genesis 3000 MTE Betriebsanweisung Seite 43

TIG DC
MIG/MAG
1 Heading
Allows the display of certain pieces of important infor-
mation relating to the selected process:
- The synergic curve selected
1a Type of filler metal
1b Wire diameter
1c Type of gas
- Welding parameters
1d Welding current
1e Part thickness
1f Corner bead
1g Welding voltage
Downloaded from www.Manualslib.com manuals search engine
2 Welding parameters
2a Welding parameters
Select the required parameter by pressing the encoder
button.
Adjust the value of the selected parameter by rotating
the encoder.
2b Parameter icon
2c Parameter value
2d Unit of measurement of the parameter
3 Functions
Allow the setting of the most important process func-
tions and welding methods.
3a
Allows the selection of the welding process
MMA
TIG DC
MIG/MAG
Pulsed MIG
3b
TIG DC
Allows the selection of the welding method
2 Step
4 Step
Bilevel
Automation and robotics
43