Balluff BOS R254K-UUI-PR10-S4 Handbuch Seite 132

BOS R254K-UUI-PR10-S4
Photoelectric Sensors
4
Primary Device Functions (continued)
4.3.2 Process Data (AdSS)
Object ID Name
0x0038 (56) ADSS 1
0x003E (62) Teach IN
Tab. 4-5: Switching profiles – process data
4.3.3 Process Data (LSSC)
Object ID Name
0x003A (58) LSSC 1
0x003B (59) LSSC 2
0x003C (60) LSSC 3
0x003D (61) LSSC 4
0x003E (62) Teach IN
Tab. 4-6: Switching profiles – process data
4.3.4 ISDU (AdSS)
Name Index
SSC 0x0038 (56)
Parameter
SP
SSC 0x0039 (57)
Configuration
Logic
Teach-In 0x003B (59)
Result
Tab. 4-7: Switching profiles – ISDU
SSC Parameter SP
This parameter represents the currently set switching point
(setpoint). The default setting is 0x7FFC. This corresponds
to the value for "No Measurement Data" and deactivates
the switching channel.
SSC Configuration Logic
With the help of this parameter, the switching logic of the
switching channel can be configured.
Value Meaning
0x01 (1) High active
0x02 (2) Low active
Tab. 4-8: Switching profiles – SSC Configuration Logic
28 english
Description
AdSS Switching signal channel
Manual teach-in trigger
Description
LSSC Switching signal channel 1
LSSC Switching signal channel 2
LSSC Switching signal channel 3
LSSC Switching signal channel 4
Manual teach-in trigger
Subindex Access
0 RW
0 RW
0 RO
Description
Switching logic High
Active
Switching logic Low
Active
Length Data Type
16 bits IntT16
8 bits UIntT8
8 bits UIntT8
Direction
Output
Input
Direction
Output
Output
Output
Output
Input
Data Default
Storage
No 0x7FFC
No 0x00
No –