Ottobock C1000 DS Gebrauchsanweisung Seite 130

Safety instructions
n When using the seat height adjustment function, no un-
authorised persons may be present in the danger zone.
n There must not be any interfering objects or obstacles
in the adjustment range.
n All attendants must be informed that there are pinch
points caused by the construction in the area between
the seat frame and wheelchair frame.
n Users and attendants must not reach into the danger
zone.
CAUTION
Risk of crushing or pinching in the pivot range of the
footrests. Ensure limbs are clear of the danger zone when
folding the footplates up or down.
CAUTION
Risk of accidents when driving without experience. Driv-
ing without experience can lead to tipping or other danger-
ous situations. Practice using the wheelchair on level,
straightforward terrain before using it.
130 Ottobock
|
CAUTION
Risk of accidents due to uncontrolled driving character-
istics. Uncontrolled movements can occur during the op-
eration of the power wheelchair as a result of malfunctions.
In this case, please contact your authorised dealer imme-
diately. If any faults, defects or other hazards that can lead
to personal injury are detected, the power wheelchair must
be taken out of service immediately.
CAUTION
Risk of accidents and injury due to getting into or out of
the wheelchair improperly. Turn off the wheelchair con-
trols in order to get into or out of the wheelchair. Note that
the arm rests are not capable of bearing full body weight,
and therefore must not be used for getting into or out of the
wheelchair.
CAUTION
Risk of accidents and injury due to rolling. Releasing the
brake may result in uncontrolled rolling of the power wheel-
chair. Therefore, ensure that the brake is engaged after
parking the power wheelchair.
C1000 DS