Flott P 30 STG PV Betriebsanleitung Seite 27

Software module "Spindel-Stop"("Spindle-Stop") (option)
Starting from software version 1.5 the programmable feed PV electronic can be equipped optionally with an
electronic spindle-stop
General description
With the function "spindle-stop the driving motor of the spindle will be stopped after each processing as soon as the
spindle has reached the upper end position. After the spindle has come to rest a new work piece can be installed
safely.
By activating the drilling cross tracer or the keys
Activation "spindle-stop"
By activating the key for more than 1.5 seconds the menu function selection will be called.
Spindle- Stop: on
With and the function changes between On and Off
By activating the key again for more than 1.5 seconds or if there is no keystroke for more than 20 seconds
the menu will be terminated.
205289 D/GB
GB
the spindle is started again
25