Parkside PRS-710 Bedienungs- Und Sicherheitshinweise Seite 23

Wear ear and eye protection.
Class II machine – Double
insulation – You don't need any
earthed plug.
Do not discard electric appliances
together with ordinary household
waste.
According to European Directive
2002/96/EG on used electrical and
electronic devices and its implementation
in national law, used electrical devices
must be collected separately and recycled
in an environmentally sound manner.
Recycling alternatives to the return
requirement: As an alternative to returning
the device, in the case of a transfer of
ownership, an electrical device owner is
obliged to assist in proper utilisation.
For this purpose, the used device can also
be handed over to a collection facility that
will see to its disposal in the accordance
with the national circular economy and
waste disposal law. Not affected are
accessory parts and tools that accompany
used devices but contain no electrical
components.
Safety instructions
Warning!
Read all instructions. Failure to follow
all instructions listed below may result
in electric shock, fire and/or serious
injury. The term "power tool" in all of the
warnings listed below refers to your mains
operated (corded) power tool or battery
operated (cordless) power tool. Save
these instructions.
RSM6026 Lidl Manaul E # 0812-22 FC.indd 27
Safety instructions
1) Work area
a. Keep work area clean and well
lit. Cluttered and dark areas invite
accidents.
b. Do not operate power tools in
explosive atmospheres, such as in the
presence of flammable liquids, gasses
or dust. Power tools create sparks
which may ignite the dust of fumes.
c. Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.
2) Electrical safety
a. Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
which earthed (grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
b. Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
c. Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric
shock.
d. Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase
the risk of electric shock.
e. When operating a power tool outdoors,
use an extension cord suitable for
outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric
shock. Always use tool in conjunction
with a residual circuit breaker device.
GB/MT 27
12/22/08 1:42:08 PM