Service & Maintenance; Disposal & Warranty - Parkside PRS-710 Bedienungs- Und Sicherheitshinweise

• Ensure that the bottom edge of the
footplate (1) rests on the workpiece
surface as shown.
• Slowly saw into the workpiece at an
angle, moving the saw to a vertical
position and continue to saw along the
cutting line.
• Switch the saw off and lift off the
workpiece when the work is complete.
Flush sawing
• Elastic bi-metal saw blades allow you
to saw protruding objects (e,g, water
pipes, iron bars, etc,) nearby the wall.
• Apply the saw blade directly to the wall
and bend slightly so that the footplate
rests against the wall.
• Switch the machine on and saw off
the workpiece keeping constant lateral
pressure against the wall.
5. SERVICE & MAINTENANCE
Make sure that the device is
unplugged during cleaning and
maintenance. Injury or
electrocution could occur if the
device is unintentionally turned on!
The machines have been designed to
operate over a long period of time with
a minimum of maintenance. Continuous
satisfactory operation depends upon
proper machine care and regular cleaning.
Cleaning
Keep the ventilation slots (8) of the
machine clean to prevent overheating of
the engine. Regularly clean the machine
housing with a soft cloth, preferably after
each use. Keep the ventilation slots free
from dust and dirt. If the dirt does not
come off use a soft cloth moistened with
soapy water.
RSM6026 Lidl Manaul E # 0812-22 FC.indd 31
Service & maintenance / Disposal & warranty
Never use solvents such as petrol,
alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
Lubrication
The machine requires no additional
lubrication.
Malfunctions
If defects or interruptions in operation
should occur (e.g., through wear and tear
on a part), please contact our service
department (see warranty card). The
device contains no parts that can be
replaced by the user. At the end of this
manual, you will find a list of replacement
parts that can be ordered, as well as an
exploded diagram of the device.
6. DISPOSAL & WARRANTy
Environment
To prevent damage during transport, the
appliance is delivered in a solid packaging
which consists largely of reusable
material.
Therefore please make use of options for
recycling the packaging.
2002/96/EG on used electrical and
electronic devices and its implementation
in national law, used electrical devices
must be collected separately and recycled
in an environmentally sound manner.
Recycling alternatives to the return
requirement: As an alternative to returning
the device, in the case of a transfer of
ownership, an electrical device owner is
obliged to assist in proper utilisation.
Do not discard electric appliances
together with ordinary household
waste.
According to European Directive
GB/MT 31
12/22/08 1:42:10 PM