Machine Information; Safety Instructions - Parkside PRS-710 Bedienungs- Und Sicherheitshinweise

Machine information / Safety instructions
RECIPROCATING SAW
Read the operating instructions
carefully before using this device.
Familiarize yourself with its
functions and basic operation.
Service the device as per the
instructions to ensure that it
always functions properly. The
operating instructions and the
accompanying documentation
must be kept in the vicinity of the
device.

1. MACHINE INFORMATION

Technische Daten
Mains voltage
Frequency
Power input
No-load speed
Saw stroke
Max. saw capacity wood 115 mm
Max. saw capacity plastic 115 mm
Max. saw capacity steel 5 mm
Vibration
L (sound pressure level) 88,8+3 dB(A)
PA
L (sound power level) 99,8+3 dB(A)
WA
Protection
IP Code
Contents of packing
1 Reciprocating saw
1 Saw blade for wood 150 6TPI
1 Saw blade for steel 150 mm bi-metal
18TPI
1 Hex key

1 Safety instructions

1 Warranty card
Check the appliance, any loose parts and
accessories for damage caused during
transport.
26 GB/MT
RSM6026 Lidl Manaul E # 0812-22 FC.indd 26
This sabre saw is appropriate for use
on wood and materials similar to wood,
plastic and metal. It can be used for
straight and curved cuts. This device is
intended exclusively for use in private
households. Commercial or similar
applications do not constitute intended use
and will void all warranty claims.
Product information
(The numbers in the text refer to the
diagrams on page 2)
1. Foot plate
2. Saw buckle
3. On/Off switch
4. Switch lock
5. Footplate mounting screws.
6 Saw blade for wood
7. Saw blade for metal
230-240 V~
50 Hz
2. SAFETy INSTRUCTIONS
710 W
0-2500 min
-1
20 mm
Explanation of the symbols
12,388+1,5 m/s
2
Class II
IP 20
Read instructions carefully.
In accordance with essential
applicable safety standards of
European directives.
Denotes risk of personal injury,
loss of life or damage to the tool in
case of non-observance of the
instructions in this manual.
Indicates electrical shock hazard.
Wear a dust mask. Working with
wood, metals and other materials
may produce dust that is harmful
to health. Do not work with
material containing asbestos!
12/22/08 1:42:08 PM