Error Messages; Troubleshooting - Torqeedo Travel 603 CS Kurzanleitung

9

Error messages

The digital operating manual has a full list of error messages under www.torqeedo.com.
Display Cause
E05 Motor/propeller blocked
E07 Overcurrent to motor
E21 Tiller
E22
E23
page 30 / 140

Troubleshooting

1. Move the main switch to the "OFF" position.
2. Disconnect the battery connection.
3. Release the blockage.
4. Turn the propeller one more turn by hand.
5. Reconnect the battery to the system.
Continue at reduced power.
Contact Torqeedo Service.
Recalibrate.
1. Press and hold the CAL button for ten seconds.
✓ cal up appears on the display.
2. Set the tiller to full throttle forwards.
3. Press the CAL button.
✓ cal stp appears on the display.
4. Set the tiller to the neutral position.
5. Press the CAL button.
✓ cal dn appears on the display.
6. Set the tiller to full throttle reverse.
7. Press the CAL button.
If the problem persists, contact Torqeedo Service.
Error messages
V. 1.0 / English