Inhaltsverzeichnis
Werbung
8. IR controller
BLACK OUT Mode
1. Press BLACK OUT to switch off the light, Press BLACK OUT return the last modes.
AUTO Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
1. Press <AUTO> on the IRC.
2. Press <+> or <–> to choose between the different auto programs.
SOUND Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
1. Press <SOUND> on the IRC.
2. Press <+> or <–> to choose between the different SOUND programs.
STROBE Mode
To adjust the strobe speed of the automatic program and the sound active
program.
1. Press <STROBE> on the IRC.
2. Press <+> or <–> to either increase or decrease the speed of the program.
3. Press <STROBE> again to turn off the strobe.
SPEED Mode
To adjust the speed of the automatic program and the sound active program.
1. Press <SPEED> on the IRC.
2. Press <+> or <–> to either increase or decrease the speed of the program.
SENSITIVITY Mode
To adjust sound sensitivity for in Sound-Active mode
1. Press <SENSITIVITY> on the IRC.
2. Press <+> or <–> to either increase or decrease sound sensitivity.
DMX/% Mode
To enable DMX or disallow DMX on the product
Press <DMX> on the IRC, the product work on the DMX controlling modes.
MANUAL Mode
1. Press <MANUAL> on the IRC.
2. Press <R>, <G>, <B>, <W> (red, green, blue or white) to choose your color.
3. Press again <R>, <G>, <B>, <W> (red, green, blue or white) to close your color.
UNIT Mode
To fade the light putout
1. Press <UNIT> on the IRC.
2. Press <1> to adjust PAN movement mode, press <2> to adjust TILT movement mode,
3. Press <+> or <–> to change the movement direction. repress <+> or <–> to position.
4, Press <UNIT> again, exit the present UNIT mode.
©Copyright LOTRONIC 2015
LMH250-RC
Page 7
Werbung
Inhaltsverzeichnis
