Instruction For Use - eta SteamMaster Bedienungsanleitung

GB
B – Extension adapter + vacuum cleaner
B1 – Handle
B2 – Steam unit lock button
C – Dust container
C1 – Lid + fabric filter
C2 – Foam filter
C3 – Suction chamber lid
D – Extension handle
D1 – Steam discharge button
D2 – ON/FF switch vacuum cleaner
E – Accessories
E1 – Concentrating cone nozzle
E2 – Flexible extension hose
E3 – Nylon round brush
F – Mopping / Floor nozzle
F1 – Floor nozzle lock button
F2 – Mopping textile holder
G – Wall holder
Optional accessories order numbers: A5 (ETA323400070), C2 (ETA323400110), F3 (ETA3234 00150).
III. INSTRUCTIONS FOR USE
Remove all packaging materials and take out the appliance with accessories.
Remove all adhesive foils, stickers or papers.
Installing the holder G on the wall
To install the holder on the wall, use the holes on its back. Mount the holder on the wall
using a suitable connecting material.
Assemble the sppliance and relevant accessories according to the intended activity (dry or
steam) hovering/cleaning.
A) STEAM MOP (Fig. 1a)
If you are going to use the appliance particularly for mopping and cleaning floors, assemble
it as follows: connect steam unit A, extension adapter + vacuum cleaner B and mopping /
floor nozzle F to the extension handle D. When disassembling the set, first release the lock
mechanisms (steam unit A by button B2, mopping/floor nozzle F by button F1), and only
then dismount the individual parts of the mopping adapter. If the above-described set is
used, mopping/floor nozzle D may be independently (cleaning dry surfaces) or added with
the mopping textile F3 put on (surfaces designed for simultaneous vacuuming and mopping
parquets and other hard floors e.g. floating floors, tiles, linoleum, etc.)
B) HANDHELD STEAM CLEANER (Fig. 1b)
If you are going to use the appliance as a handheld steam cleaner, remove the steam unit A
from the extension adapter B by pressing the lock button B2, (Fig. 2)
Accessories assembly options
Steam cleaner may be used in many assembly variants, keeping the following rules:
– Concentrating nozzle E1 and extension hose E2 may only be installed on steam nozzle
A6. Both adapters can be used either separately, or concentrating nozzlewith the
accessories E3–E5 mounted.
– Accessories E3–E5 can be put on the concentrating nozzle E1.
B3 – Cord reel holder
C4 – Suction chamber
C5 – Container lock buttons
C6 – Handle
D3 – Cord reel holder
D4 – Safety bolt
E4 – Brass round brush
E5 – Grout brush
F3 – Mopping textile (sleeve)
26 / 59