Preparation For Use; Vaccum Cleaner Use - eta Twins Bedienungsanleitung

EN

4. PREPARATION FOR USE

Remove all packing material, remove vacuum cleaner and accessories.
Remove any adhesive, stickers, or paper from the vacuum cleaner.
4.1 VACUUM CLEANER PREPARATION
Fit the dirt container B or mop unit H, according to intended use.
4.2 INSTALLATION OF THE CHARGING DOCK WITH THE DIRT
EXTRACTION UNIT
1. Place the charging dock with the dirt extraction unit on the floor, at a distance of approx.
6 cm from the wall. Be sure there is sufficient space at the sides of the charging dock
(at least 0.5 m) and before the charging dock (at least 1.2 m). Avoid exposure of the
charging dock with the dust extraction unit to sun.
2. Connect supply cable E to the charging dock, and then to the mains.
6 cm

5. VACCUM CLEANER USE

The device has voice notification function which can be set in various languages
Insert the battery into the remote control, observe correct polarity (2 pieces, battery type AAA).
5.1 SWITCHING ON THE VACUUM CLEANER
1. Press button C1 for approx. 3 seconds.
2. Light buttons will be on, initial sound signal, and then the switched-on voice message
will be heard.
5.2 BATTERY CHARGING
1. Check correct connection of the charging dock with the dust extraction unit to the mains
(backlit buttons D1, D2 and indicator lamp D4 must be on).
Remark
(this function can be deactivated).
EN - 50