Inserting And Removing Connecting Cable Plug; Inserting The Connecting Cable Plug; Removing The Connecting Cable Plug; Switching The Trimmer On/Off - Stihl FSA 130 R Gebrauchsanleitung

English
► Loosen the screws (2).
► Move the loop handle (1) to the required position and
make sure that:
– The spacer sleeve (3) fits between the loop handle (1)
and carrying ring.
– If you are using a mowing head: a = no more than 30 cm
– If you are using a metal cutting attachment: a = no more
than 25 cm
► Tighten down the screws (2) so that the loop handle
cannot be rotated on the drive tube.
8 Inserting and Removing Connecting
Cable Plug
8.1

Inserting the Connecting Cable Plug

56
1
a
2
3
1
2

8 Inserting and Removing Connecting Cable Plug

► Hold connecting cable plug (2) so that the arrow on its side
lines up with the arrow on the socket (1).
► Insert the connecting cable plug (2) in the socket (1).
The plug (2) engages in position.
8.2

Removing the Connecting Cable Plug

► Grip the connecting cable plug (2) with your hand.
► Pull the plug (2) out of the socket (1).

9 Switching the Trimmer On/Off

9.1

Switching On

► Hold the trimmer with your right hand on the control
handle – wrap your thumb around the control handle.
► Hold the trimmer with the other hand on the loop handle -
wrap your thumb around the loop handle.
1
2
0458-725-9821-C