English
► Loosen the star knob nut (1).
► Tilt the loop handle (2) to the required position.
► Tighten down the star knob nut (1) firmly.
8.4
Converting Trimmer to Edger
► Switch off the trimmer and remove the activation key.
1
2
► Depress lock button (1) and hold it in that position.
► Rotate control handle (2) 90° until it engages.
► Release the lock button (1).
► Depress the lever (4) and hold it in that position.
► Swing the shaft (2) to the flattest position until it engages.
► Release the lever (4).
► Extend the bump guard (5) fully.
44
2
1
3
4
9 Inserting and Removing Activation Key
9 Inserting and Removing Activation
Key
9.1
Inserting the Activation Key
1
► Insert the activation key (1) in the socket (2).
9.2
Removing the Activation Key
► Stand the trimmer on a level surface.
► Remove the activation key.
► Keep the activation key out of the reach of children.
10 Switching the Trimmer On/Off
10.1 Switching On
► Hold the trimmer with one hand on the control handle -
wrap your thumb around the control handle.
► Hold the trimmer with the other hand on the loop handle -
wrap your thumb around the loop handle.
2
0458-718-9821-B