HBM WE2111 Bedienungsanleitung Seite 71

WE2111

Press the
select the next place or the
ting.
For a dual-range balance or dual-interval weighing ma-
chine you must also enter CAP2 (capacity of range 2). To
do this press the
Enter the minimum load cell verification interval
(verification interval)

Press the

Press the
 Enter the required minimum load cell verification interval.
The following entries are allowed (without decimal place):
1, 2, 5, 10, 20, 50 or 100. Enter the numeric value the
same way as for the nominal (rated) range, digit by digit
with and
 Press the
For a dual-range balance or dual-interval weighing ma-
chine you must also enter E2 (minimum load cell verifica-
tion interval of range 2). To do this press the
if E1 is displayed.
E2 must be greater than E1.
Adjustment and calibration
key to change that place, the
key twice if CAP1 is displayed again.
key until E1 is displayed.
key.
.
key to finish.
A3603-2.0
key to complete the set-
key to
key twice
71