HBM WE2111 Bedienungsanleitung Seite 70

Adjustment and calibration
70
 When the desired operating mode is displayed, press the
key.
Enter places after the decimal

Press the

Press the
000000 is displayed.
 Press the
position.

Press the
Entering the nominal (rated) range of the weigher
(scale capacity)

Press the
played.
 Press the
In the factory setting 0030.00 is displayed, otherwise
the most recently entered number.

Press the
changed is flashing.
key until dP is displayed.
key.
key until the decimal point is in the desired
key.
key until CAP1 (capacity of range 1) is dis-
key.
key until the first place in the display to be
A3603-2.0
WE2111