HBM WE2111 Bedienungsanleitung Seite 108

Output options
108
Defining general settings
The display must show buiLd or one of the main menu
items to be able to make the following setting.

Press the

Press the
SEr1 is displayed. SEr1 and SEr2 set the parameters
for the two rear serial interfaces. If you want to use one
of the optional modules for an electrically isolated in-
terface, you must use SEr3 (RS-485 module) or SEr4
(RS-232).
 After you have selected the interface press the
tYPE is displayed.

Press the

Use the
The possible settings are: OFF, Auto.Lo (automatic
output at 10 Hz), Auto.Hi (automatic output at the
SYNC frequency; see
output to printer), Sin9LE (single, one-time output, see
section on Digital inputs/outputs, F key function:
tion overview) and NEt (network interface, default set-
ting).

Press the

Press the
bAUd is displayed.
key until SEriAL is displayed.
key.
key.
key to specify the desired function.
SYNC
key to confirm the setting.
key.
A3603-2.0
filters), Print (activate
key.
func-
WE2111