Device Description; Commencing Operation; Application - Beurer MP 60 Gebrauchsanweisung

– If the instrument has dropped into water, unplug the plug-in power unit immediately.
– Ensure your hands are dry before handling either the instrument or the plug-in power unit.
– Do not pull on the power cord or instrument to unplug the plug-in power unit from the socket
outlet.
– The plug-in power unit must be operated only from a power supply as specified on it.
– If the power supply is damaged, don't use the adaptor anymore!
– For reasons of hygiene, the device should only be used on one person.
– Do not use on animals.
– Please ensure that no hair can get caught in the rotating attachments when using the device.
Use a hair tie for your safety.

5. Device description

1. Manicure/pedicure device
2. +/- Speed regulation

6. Commencing operation

This manicure and pedicure device comes with high-quality attachments. The supplied 9 attach-
ments are made with durable sapphire coating / polishing felt. Together with the continuously
adjustable speed regulation and right/left rotation, professional foot and nail care at the standard
of a pedicurist is possible. All the attachments can be easily integrated into the storage pouch of
the MP 60.
After use, before cleaning and changing any accessory parts, the power unit should always
be disconnected.
Ensure that the sliding switch on the device is in the cent

7. Application

– This instrument is intended only for the treatment of hands (manicure) and feet (pedicure).
– Make sure that the device is switched off beforehand.
– Select an attachment and push it onto the instrument spindle using a slight pressure. The
attachments can be heard to engage. To remove: pull the attachment and instrument apart in
the axial direction (straight).
– Switch on the instrument by sliding the slide switch to the left (anticlockwise running) or to the
right (clockwise running). The two buttons marked with plus (+) and minus (-) allow you to se-
lect the speed of rotation. Start every application at low speed and increase it only as required.
– All file and cutting attachments are coated with a sapphire grain. This guarantees extremely
long life and almost guarantees freedom from wear.
– Do not exert heavy pressure and always guide the attachments carefully over the surface to be
treated.
– Move the instrument under light pressure in circular movements slowly over the parts to be
treated.
2
1
4
3
3. Clockwise/anti-clockwise rotation
4. Storage bag
13