Automatic cooking
All the cooking zones are equipped with an automatic "go and stop" cooking device. The
cooking zone starts at full power during a certain time, then reduces automatically its power
on the preselected level.
Start-up
Action
Zone selection
Full power setting
Automatic cooking
Power level selection
(for example « 7 »)
Switching off the automatic cooking
Action
To stop the function
Stop&Go function
This function brakes all the hob's cooking activity and allows restarting with the same settings.
Start up / Stop the pause function
Action
Engage Stop&Go
Stop the Stop&Go
Recall Function
After switching off the hob (0/I), it is possible to recall the last settings.
cooking stages of all cooking zones (power)
minutes and seconds of programmed cooking zone-related timers
Heat up function
Keep warm function
The recall procedure is following:
Press the key [0/I]
Then press the key [ II ] within 6 seconds
The precedent settings are activated.
Bridge Function
This function allows to use the 2 cooking zones at the left at same time with the same
features as a single cooking zone. Power function isn't allowed.
Action
Activate the hob
Activate the bridge
Increase bridge
Stop the bridge
It's possible to activate a second bridge for the reference 1706-1 by press simultaneously keys
[ - ] front left and [ + ] rear left.
Control panel
Press on key [ + ]
Press on key [ + ]
Press on key [ + ]
Press on key [ - ]
Control panel
Press the zone key [ - ]
and [ + ] simultaneously
Control panel
Press [ II ] key
Press [ II ] key
and press any key [ + ] or [ - ]
Control panel
Press [ 0/I ]
Press simultaneously [ + ]
rear right and [ - ] front right
Press any key [ + ] or [ - ]
Press simultaneously [ + ]
rear right and [ - ] front right
53
Display
[ 4 ]
[ 4 ] to [ 9 ]
[ 9 ] is blinking with [ A ]
[ 9 ] [ 8 ] [ 7 ] .........[ 1 ]
[ 7 ] is blinking with [ A ]
Display
[ 0 ]
Display
displays [ II ] in the
heating zone displays
pause control light is
blinking.
Display
[ 0 ] or [ H ]
[ 0 ] and [ ∏ ]
[ 1 to 9 ]
[ 0 ] or [ H ]