Function "Keep Warm; Automatic Cooking - Novy Flex Zone Montage- Und Bedienungsanleitung

 To stop the cooking time of a heating zone
Action
To stop the « Timer »
If several timers are activated repeat the process.
 Automatic stop at the end of the cooking time
As soon as the selected cooking time is finished the timer displays blinking [00] and a sound
rings and the heating zone stops.
To stop the sound and the blinking it is enough to press the timer key [ - ] or [ + ].

Function "keep warm"

This function of maintenance to the heat makes it possible to reach and maintain
automatically a temperature of 70°C.
This will avoid liquids over spillage and the food to attach at the bottom of the pan.
Start-up:
You must initially engage the cooking surface, then the zone of heating:
 To engage, to start the function " keep warm "
Action
To engage
To select the desired
heating zone
To stop
This function can be started independently on all the heating zone.
When the pan leaves the zone of cooking the "keep warm" function remains active during
approximately 10 minutes.
The maximum duration of maintenance to the heat is 2 hours.

Automatic cooking

All the cooking zones are equipped with an automatic "go and stop" cooking device. The
cooking zone starts at full power during a certain time, then reduces automatically its power
on the preselected level.
 Start-up
Action
Zone selection
Full power setting
Automatic cooking
Power level selection
(for example « 7 »)
 Switching off the automatic cooking
Action
To stop the function
Control panel
Press on timer key [ + ] and [ - ]
Simultaneously until the desired
heating zone
Press on timer key [ - ]
Press second time on timer key [ - ]
Control panel
Press "U" key
Press key [ + ] or [ - ]
Press key [ + ] or [ - ]
Control panel
Press on key [ + ]
Press on key [ + ]
Press on key [ + ]
Press on key [ - ]
Control panel
Press the zone key [ - ]
and [ + ] simultaneously
50
Display
The time displays
displays [01.]
displays [00.]
Display
keep warm control light is blinking
[ U ]
[ 0 ] to [ 9 ]
Display
[ 4 ]
[ 4 ] to [ 9 ]
[ 9 ] is blinking with [ A ]
[ 9 ] [ 8 ] [ 7 ] .........[ 1 ]
[ 7 ] is blinking with [ A ]
Display
[ 0 ]