GEZE TS 5000 ISM EFS Montageanleitung Seite 11

TS 5000 ISM EFS
In case this product is in use with an hold-open device, please observe the document "Instructions for
Installation, Commissioning, Operation and Maintenance of the GEZE Hold-Open Device FA GC" as well.
6.2 Mounting guide rails and end caps
5x55
M5x45
2.
3.
1.
M4x8
Align spacers on moving and fixed-leaf guide rails (
X
Fix guide rails in place (tightening torque: 2 Nm) (
X
Align end cap on moving leaf and screw it on (
X
Align end cap on fixed leaf and screw it on (
X
Mount door closer on fixed leaf according to the mounting instructions (
X
All screwing torques are to be adjusted on site, if necessary.
6.3 Mount free-swing door closer and lever on the moving leaf
In the case of concealed wiring the cable must already be laid in the door leaf with drill hole Ø 20. It will be con-
nected to connection D, in accordance with fig. 6.4.1 at al later time
Screw down free-sing door closer (
X
Turn driver plate in accordance with fig. 6.5.1 into the correct position (
X
3.
5x55
M5x45
2.
GF
1.).
3.
2.
5x55
M5x45
2.
1.
1.).
2.).
3.) (tightening torque: 2 Nm).
4.) (tightening torque: 2 Nm).
1.
Mounting and securing
M5x45
SF
5.
4.
M4x8
5.).
2.), Attach lever and screw down (3.).
3.
2.
3.
5x55
2.
1.
Fig.: 6.2.1
Fig.: 6.3.1
GB 4