Turbo Function; Overflow; Starting And Stopping The Device - Silvercrest MONSIEUR CUISINE ÉDITION PLUS Bedienungsanleitung

9.10 Turbo function

CAUTION:
When mixing liquids, the blender jug 5
must not contain more than 1 litre, since
otherwise liquid might be ejected.
Never use this function when the mixer
attachment 31 is used.
With the turbo function you can briefly select
speed setting 10 (maximum). This, for exam-
ple, is used to quickly chop nuts, small
amounts of herbs or onions.
- TURBO 20 lit white: the function is
possible.
- TURBO 20 lit red: the button is
blocked, the function is disabled (e.g.
because the food temperature inside the
blender jug exceeds 60 °C).
NOTE: if you nevertheless press
the button TURBO 20, a signal
will sound and the display 27
will show the symbol on the right.
• Press and keep button TURBO 20
pressed for as long as you need the
function.
NOTES:
• The turbo function will only work
- if the blade assembly 29 is not turn-
ing.
- if the food temperature in the blender
jug 5 is less than 60 °C.
• The speed is promptly increased to set-
ting 10 (maximum).
18 GB

9.11 Overflow

In the holder of the blender jug 9 there is an
overflow hole 11.
Should liquid escape from the blender
jug 5, this will not collect in the base
unit 13, but can escape via the overflow
hole 11 onto the surface.
9.12 Starting and stopping
the device
• After setting one or more values or a
programme, start the device by pressing
button START/STOP 19.
• By pressing button START/STOP 19
again, you abort an ongoing cooking
or processing process.
11