Press out function
In standby mode, push the press out button
to select the press out function. The buzzer will
sound and a digital countdown from „5:00"
minutes of processing time will show in the LC
display
:
2a
The press out function starts automatically and
at the end of the processing time, „OFF" will
appear in the LC display
has already been pressed out before the end
of the 5 minutes, the device can be switched
off. If there is still dough left in the mixing cham-
ber after the 5 minutes have passed, follow the
instructions in the chapter „Processing left-over
dough".
Protection function
The device can only be switched on and operated
when the lid
is closed.
4
Filled pasta / using the
accessory for ravioli
The machine is equipped with accessories for mak-
ing filled pasta. To make filled pasta, you must first
make lasagne sheets.
Place the lasagne sheets you made on a chop-
ping board and cut out filled pasta shapes us-
ing the ravioli shaper
Place the resulting dough shape directly on the
ravioli shaper
and add your desired filling
13
(see fig. O).
Close the ravioli shaper
together (see fig. P).
Remove the completed filled pasta (see fig. Q).
Cleaning and care
Always unplug the mains plug before cleaning!
Never immerse the product in water. This poses
a risk of electric shock!
Do not use caustic cleaners and abrasives or
scouring pads, as this may cause damage the
device beyond repair.
28 GB/IE
2e
. If all of the dough
2a
(see figs. M and N).
13
and press it tightly
13
Do not clean the product with steel wool, scour-
ing agents or corrosive liquids.
Clean the product after each use.
Clean the shaping disks
cleaning pens on the sides of the dough
scraper
. With these, you can also get into
14
the holes and crevices of the shaping disks
Clean all removable parts, including the mixing
chamber, by hand. Use warm water, washing-up
liquid and a soft cleaning cloth.
The following parts are also dishwasher safe:
- Lid
4
- Mixing chamber
- Mixing paddle
5
- Pressing tube
8
- Auger
7
- Measuring cup for flour
- Measuring cup for liquids
- Shaping disks
16
- Ravioli shaper
13
Clean the housing
soft cloth.
Remove the white sealing ring
pressing tube. This stops dirt remaining between
the walls.
Note: The shaping disks are easier to clean
when the dough has hardened.
Storage
When the pasta machine has been cleaned, pro-
ceed as follows:
If necessary, unplug the mains plug from the
safety socket.
Store the pasta machine in a dry place.
roughly with the
16
1
12
11
with a slightly damp,
2
to clean the
17
.
16