Gestra RK serie Originalbetriebsanleitung Seite 31

Safety
continued
Information on property damage or malfunctions
Installing the equipment against the specified direction of flow or in the wrong location will
■
result in malfunctions. This could cause damage to the equipment or the higher-level system.
Install the equipment in the pipe in the direction of flow indicated on the body.
Equipment made from materials that are unsuitable for the fluid used will wear faster. This can
■
cause the fluid to escape. Make sure the material is suitable for the fluid used.
The equipment may be damaged if stored or transported incorrectly. Storage: Dry, clean
■
room air at 5–40°C (non-condensing, non-corrosive). Close all openings to make sure the
equipment remains dry and is protected against corrosive atmospheres.
Frost damage can occur when the system is not in operation. Drain the equipment if there
■
is a risk of frost.
EN