Childproof Lock; Activating The Childproof Lock; Changing The Basic Settings - Junker JM46GA50 Gebrauchsanleitung

Cancelling the cooking time
Use the button to reset the cooking time to 0:00. After a few
A
seconds, the change is adopted. The cooking time is
cancelled. If the timer has been set, press the
beforehand.
Checking the time settings
If several time-setting options are set, the corresponding
symbols are illuminated on the display. The
the symbol for time function which is currently visible on the
display.
To check the timer,
V x
button repeatedly until the
0
symbol. The display shows the value for a few seconds.
Setting the clock
When the appliance has been connected to the power supply,
or after a power cut, the
N0
in the display. Set the clock.

Childproof lock

The oven has a childproof lock to prevent children switching it
on accidentally.
The oven will not react to any settings. The timer and clock can
also be set when the childproof lock has been switched on.

Activating the childproof lock

Prerequisite: No cooking time should be set and the function
selector must be in the zero position.
Press and hold the d button for approx. four seconds.

Changing the basic settings

Your appliance has various basic settings which you can
change at any time.
Basic settings
In the table, you will find all the basic settings and options for
changing them.
Basic setting
Clock display
™‚
= on
‚
Signal duration
™ƒ
ƒ = medium = 2 minutes
Signal volume
™„
ƒ = medium
Waiting time
™...
ƒ = medium = 5 seconds
Requirement: Your appliance is switched off.
Press and hold the button for several seconds.
0
1.
The first basic setting appears in the display.
Use the @ or A button to change the basic setting.
2.
Confirm by pressing the
3.
The next basic setting appears in the display. You can go
through all of the basic settings using the
make changes using the
button
0
arrow is next to
N
cooking time or clock, press the
0
arrow points to the appropriate
N
symbols and three zeros light up
Options
Clock display
= off
ƒ
‚ = short = 10 seconds
= long = 5 minutes
„
‚ = low
= high
„
‚ = short = 2 seconds
= long = 10 seconds
„
button.
0
button and
0
@ or A button.
Press the or button.
@ A
1.
Default value @ : 12:00
Default value 23:59
A
Use the or button to set the clock.
@ A
2.
Press the 0 button. The time is set.
3.
Changing the clock
Prerequisite: your appliance must be switched off.
Press the button twice.
0
1.
The time symbols light up in the display, the
to the symbol.
0
Use the @ or A button to change the clock.
2.
After a few seconds, the time that has been set is adopted.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
The symbol appears in the display. The childproof lock is
@
activated.
Deactivating the childproof lock
Press and hold the button for approx. four seconds.
d
The @ symbol on the display goes out. The childproof lock is
deactivated.
Childproof lock with automatic programmes
When automatic programmes have been set, the childproof
lock is not operational.
Explanation
Displays the clock
Audible signal after the cooking time has
elapsed
Volume of the signal
Waiting time between two separate steps,
after setting
When finished, press and hold the
4.
seconds.
All settings are applied.
You can change the settings at any time.
N arrow is next
0 button for several
33