Rapid Heat Up; Automatic Safety Switch-Off; The Microwave; Microwave Power Settings - Junker JM46GA50 Gebrauchsanleitung

Changing the settings
The type of heating and temperature or grill setting can be
changed at any time using their respective selectors.

Rapid heat up

With Rapid heat up, your oven reaches the temperature set
particularly quickly.
Use the Rapid heat up function when temperatures above
100 °C are set. The Rapid heat up function is available for the
following types of heating:
Hot air
~
■
Circotherm intensive
}
■
™ Circulated air grilling
■
To ensure an even cooking result, do not place your food in the
cooking compartment until Rapid heat up is complete.
Set the type of heating and temperature.
1.
Press the button.
d
2.
The symbol lights up in the display.
c

The microwave

Microwaves are converted to heat in foodstuffs. The microwave
can be used solo, i.e. on its own, or in combination with a
different type of heating. You will find information about
ovenware and how to set the microwave.
Note:
In the Tested for you in our cooking studio section, you will find
examples for defrosting, heating and cooking with the
microwave oven.
Notes regarding ovenware
Suitable ovenware
Suitable dishes are heat-resistant ovenware made of glass,
glass ceramic, porcelain, ceramic or heat-resistant plastic.
These materials allow microwaves to pass through.
You can also use serving dishes. This saves you having to
transfer food from one dish to another. You should only use
ovenware with decorative gold or silver trim if the manufacturer
guarantees that they are suitable for use in microwaves.
Unsuitable ovenware
Metal ovenware is unsuitable. Metal does not allow microwaves
to pass through. Food in covered metal containers will remain
cold.
Caution!
Creation of sparks: metal – e.g. a spoon in a glass – must be
kept at least 2 cm from the oven walls and the inside of the
door. Sparks could destroy the glass on the inside of the door.
Ovenware test
Do not switch on the microwave unless there is food inside. The
following ovenware test is the only exception to this rule.
Perform the following test if you are unsure whether your
ovenware is suitable for use in the microwave:
Heat the empty ovenware at maximum power for ½ to
1.
1 minute.
Check the temperature occasionally during that time.
2.
The ovenware should still be cold or warm to the touch.
The ovenware is unsuitable if it becomes hot or sparks are
generated.
Press the button.
†
3.
The oven begins to heat up.
The Rapid heat up process is complete
A signal sounds. The
c
your food in the oven.
Cancelling Rapid heat up
Press the button briefly. The
d
out.

Automatic safety switch-off

The automatic safety switch-off is activated if your appliance is
operating for a long time with no cooking time having been set.
The time at which your appliance switches itself off depends on
the set operating mode and temperature.
Example: If your oven is operating with Hot air at 160 °C, it will
automatically switch off after approx. 5 hours.
appears in the display panel. The appliance switches off. To
"ƒ
acknowledge, press the
†

Microwave power settings

Use the button to set the desired microwave power.
90 W for defrosting delicate foods
180 W for defrosting and continued cooking
360 W for cooking meat and heating delicate foods
600 W for heating and cooking food
900 watts for heating liquids
Notes
When you press a button, the selected power lights up.
■
The microwave power can be set to 900 watts for a
■
maximum of 30 minutes. With all other power settings a
maximum cooking time of 1 hour 30 minutes is possible.

Setting the microwave

Example: Microwave power setting 360 W, cooking time
17 minutes
Set the function selector to
1.
Press the button for the microwave power setting you require.
2.
The button lights up and a suggested cooking time is
displayed.
Use the @ or A button to set the cooking time.
3.
Press the † button.
4.
Operation begins. The cooking time starts counting down in the
display.
The cooking time has elapsed
A signal sounds. Microwave operation has finished. Turn the
function selector to the zero position. You can stop the audible
signal by pressing the
0
Opening the oven door during operation
Operation is suspended. After closing the door, press the
button. Operation continues.
†
Changing the cooking time
This can be done at any time. Use the
the cooking time.
symbol in the display goes out. Put
symbol in the display goes
c
button.
x .
button.
or button to change
@ A
29