Safety Regulations - SICE S 58 LL Betriebsanleitung

The equipment is intended for professional use only.
WARNING
Only one operator may work with the equipment at a time.
WARNING
Failure to comply with the instructions and danger warnings can cause serious injuries
to the operator or other persons.
Before starting up the equipment, always ensure you have read and understood all
the danger/warning signs in this manual.
In order to operate the machine correctly, it is necessary to be a qualified and authorised
operator, be able to understand the written instructions provided by the manufactured
and be trained and to know the safety regulations. Operators are expressly forbidden
from using the machine under the influence of alcohol or drugs capable of affecting
physical and mental capacity.
The following conditions are essential:
- read and understand the information and instructions described in this manual;
- have a thorough knowledge of the features and characteristics of the machine;
- keep unauthorised persons well clear of the working area;
- make sure that the machine has been installed in compliance with all relevant stand-
ards and regulations in force;
- Make sure that all machine operators are suitably trained, that they are capable
of using the machine correctly and safely and that they are adequately supervised
during work;
- do not touch power lines or the inside of electric motors or other electrical equip-
ment before making sure that they have been powered off;
- read this booklet carefully and learn how to use the machine correctly and safely;
- Always keep this operator manual in a place where it can be easily accessed and do
not neglect to consult it.
WARNING
Do not remove or deface the DANGER, WARNING, CAUTION or INSTRUCTION decals.
Replace any missing or illegible decals. Missing or damaged decals may be obtained
from your nearest dealer.
- Observe the unified industrial accident prevention regulations relating to high volt-
ages and rotating machinery whenever the machine is in use or being serviced.
- Any unauthorised alterations made to the machine automatically release the manu-
facturer from any liability in the case of damage or accidents attributable to such
alterations. Specifically, tampering with or removal of the machine safety devices is
a breach of the regulations relating to Safety at Work.
WARNING
During work and maintenance operations, always tie back long hair and do not wear
60

SAFETY REGULATIONS

- English - Operator's manual