Blackmagic Design Pocket Cinema Camera 6K Installations- Und Bedienungsanleitung Seite 91

You can add descriptions in the take number editor. These are on the right of the take number
keyboard and correspond to the following scenarios:
'Pick up.' This refers to a reshoot of a previous take to add additional material
P/U
after principal photography has wrapped.
VFX 'Visual effects.' This refers to a take or shot for visual effect use.
'Series.' This refers to a situation in which multiple takes are shot while the
SER
camera is kept running.
When entering 'take' metadata, your Blackmagic Pocket Cinema Camera will
offer prompts for additional shot types to the right of the touch keyboard
Good take
Tap the 'good take' indicator to tag good takes for easy recall in post production. This button
applies the 'good take' tag to the clip currently being viewed in playback mode. If the camera is
in standby mode and ready to record, the 'good take last clip' button applies a 'good take' tag
to the last clip recorded.
Int / Ext
Tap 'int' or 'ext' to add a 'interior' or 'exterior' tag to the next clip in standby mode, or the current
clip in playback mode.
Day / Night
Tap the 'day' or 'night' icons to add a 'day' or 'night' tag to the next clip in standby mode, or the
current clip in playback mode.
Tap 'A' to automatically increment the take
number for each clip while in standby
mode. A small 'A' appears next to the take
number on the slate when enabled.
Entering Metadata 91