Turning Your Camera On; Using A Blackmagic Pocket Camera Battery Grip - Blackmagic Design Pocket Cinema Camera 6K Installations- Und Bedienungsanleitung

Turning Your Camera On

Now that you've attached a lens, you will need to supply power to your camera. Blackmagic
Pocket Cinema Camera can be powered by inserting an LP-E6 battery into the camera, or from
two NP-F570 batteries in Blackmagic Pocket Camera Battery Grip, or by plugging the supplied
power adapter into the power input.
Inserting a Battery and Powering your Camera
Your camera uses standard removable LP-E6 type batteries. One is included with the camera,
but if you need additional batteries, they can be purchased from your Blackmagic Design
reseller or from most video or photography equipment stores.
1 On the underside of the camera, press the door release to open the battery door.
2 With the contacts facing the terminal, insert the LP-E6 type battery until you feel it click
into place under the locking tab.
TIP To release the battery, push the locking tab towards the front of the
camera and the battery will eject.
3 Close the door to the battery terminal and gently push until it clicks into place.
4 Move the power switch on the top of your camera to the 'on' position. To turn off the
camera, move the power switch to the 'off' position.

Using a Blackmagic Pocket Camera Battery Grip

If you have a Blackmagic Pocket Camera Battery Grip then it's a good idea to install it now
before you continue. The Blackmagic Pocket Camera Battery Grip is designed to fit the
Pocket Cinema Camera 6K and Pocket Cinema Camera 4K models.
The battery grip adds a horizontal handle to your camera and holds two NP-F570 L-Series
batteries so you can shoot continuously for over two hours. The 12 V DC input can recharge the
batteries in the grip or provide uninterrupted power to the camera while changing the batteries.
You can use the USB-C port to recharge batteries in the grip while the camera is switched off.
To attach Blackmagic Pocket Camera Battery Grip:
Before you start attaching Blackmagic Pocket Camera Battery Grip, switch off your Pocket
Cinema Camera and unplug any external power source.
1
Open the camera battery compartment and remove
the LP-E6 battery.
2
Slide the tab near the hinge of the battery
compartment cover and remove the cover
from the camera.
Getting Started 7