Electrolux EUF23700 Benutzerinformation Seite 20

20 electrolux
– thoroughly ventilate the room in which
the appliance is situated
• It is dangerous to alter the specifications
or modify this product in any way. Any
damage to the cord may cause a short-
circuit, fire and/or electric shock.
Warning! Any electrical component
(power cord, plug, compressor) must
be replaced by a certified service agent
or qualified service personnel.
1. Power cord must not be lengthened.
2. Make sure that the power plug is not
squashed or damaged by the back of
the appliance. A squashed or dam-
aged power plug may overheat and
cause a fire.
3. Make sure that you can come to the
mains plug of the appliance.
4. Do not pull the mains cable.
5. If the power plug socket is loose, do
not insert the power plug. There is a
risk of electric shock or fire.
6. You must not operate the appliance
without the lamp cover
lighting.
• This appliance is heavy. Care should be
taken when moving it.
• Do not remove nor touch items from the
freezer compartment if your hands are
damp/wet, as this could cause skin abra-
sions or frost/freezer burns.
• Avoid prolonged exposure of the appli-
ance to direct sunlight.
12)
• Bulb lamps
used in this appliance are
special purpose lamps selected for house-
hold appliances use only. They are not
suitable for household room illumination.
Daily Use
• Do not put hot pot on the plastic parts in
the appliance.
• Do not store flammable gas and liquid in
the appliance, because they may explode.
• Do not place food products directly
against the air outlet on the rear wall.
• Frozen food must not be re-frozen once
it has been thawed out.
• Store pre-packed frozen food in accord-
ance with the frozen food manufacturer's
instructions.
11) If the lamp cover is foreseen
12) If the lamp is foreseen
13) If the appliance is Frost Free
14) If a water connection is foreseen
• Appliance's manufacturers storage rec-
• Do not place carbonated or fizzy drinks in
• Ice lollies can cause frost burns if con-
Care and cleaning
• Before maintenance, switch off the appli-
• Do not clean the appliance with metal ob-
• Do not use sharp objects to remove frost
Installation
Important! For electrical connection
carefully follow the instructions given in
specific paragraphs.
11)
of interior
• Unpack the appliance and check if there
• It is advisable to wait at least four hours
• Adequate air circulation should be
• Wherever possible the back of the prod-
• The appliance must not be located close
• Make sure that the mains plug is accessi-
13)
• Connect to potable water supply only.
Service
• Any electrical work required to do the serv-
ommendations should be strictly adhered
to. Refer to relevant instructions.
the freezer compartment as it creates
pressure on the container, which may
cause it to explode, resulting in damage
to the appliance.
sumed straight from the appliance.
ance and disconnect the mains plug from
the mains socket.
jects.
from the appliance. Use a plastic scraper.
are damages on it. Do not connect the ap-
pliance if it is damaged. Report possible
damages immediately to the place you
bought it. In that case retain packing.
before connecting the appliance to allow
the oil to flow back in the compressor.
around the appliance, lacking this leads
to overheating. To achieve sufficient ven-
tilation follow the instructions relevant to
installation.
uct should be against a wall to avoid
touching or catching warm parts (com-
pressor, condenser) to prevent possible
burn.
to radiators or cookers.
ble after the installation of the appliance.
icing of the appliance should be carried
14)